Pulse Pal Protocol

I have been struggling to write a protocol that will deliver 2 pulses of light stimulation at 200 ms interval. I need help

Hello Ablih,

Pulse Pal is programmed by setting its parameters.
To create two 1ms pulses separated by 200ms each time Pulse Pal is triggered, you would set:

Phase1Duration = 0.001
InterPulseInterval = 0.199
PulseTrainDuration = 0.201

Please let me know whether this works for you!

Thanks,
Josh

Hi Josh,

Thank you for your kind response. I have tried this:

Phase1Duration = 0.001
InterPulseInterval = 0.199
TrainDuration = 0.201

But, the problem is it's giving two light pulses successively without the 200 ms interval.

What should I check again?

Wahab

Thank you Josh, it WORKED!