Pulse Pal Hardware installation

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Pulse Pal Hardware installation
#6
Hi Dymphie,

In the "Ports (COM & LPT)" menu, "COM8" is listed as a "Communications Port".
I suspect that this is Pulse Pal, and that XP is using an incorrect driver.
If you unplug Pulse Pal, does "COM8" disappear from the menu?
If so, plug Pulse Pal back in, right-click "COM8" and select "Update Driver Software". When prompted, navigate to the "Drivers" folder in the Pulse Pal repository:

/Pulse Pal/Drivers/  

Windows should automatically detect the correct driver file and install it.
If this doesn't happen, right-click "COM8" and select "uninstall". Then, unplug and re-plug Pulse Pal. This should cause Windows to run "Adding new hardware", and prompt you for the path to the drivers.

I hope this helps!

Josh
Reply


Messages In This Thread
Pulse Pal Hardware installation - by dsuchan - 02-16-2018, 07:36 PM
RE: Pulse Pal Hardware installation - by Josh - 02-16-2018, 11:26 PM
RE: Pulse Pal Hardware installation - by dsuchan - 02-16-2018, 11:59 PM
RE: Pulse Pal Hardware installation - by Josh - 02-17-2018, 07:11 PM
RE: Pulse Pal Hardware installation - by dsuchan - 02-19-2018, 04:37 PM
RE: Pulse Pal Hardware installation - by Josh - 02-19-2018, 07:59 PM
RE: Pulse Pal Hardware installation - by dsuchan - 02-19-2018, 09:11 PM
RE: Pulse Pal Hardware installation - by Josh - 02-21-2018, 03:01 AM
RE: Pulse Pal Hardware installation - by dsuchan - 02-21-2018, 04:35 PM
RE: Pulse Pal Hardware installation - by dsuchan - 02-21-2018, 06:27 PM
RE: Pulse Pal Hardware installation - by Josh - 02-21-2018, 08:25 PM

Forum Jump: