Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Assembly 2.0
#2
Hi BioESteel

The circuit board assembly instructions are ready now.
The enclosure assembly instructions are currently provided in text, but illustrations need to be added.
For now, the illustrations in the PulsePal 1.X assembly guide can be used. 

There are 2 differences:
1. You have to encase the light pipes with heat shrink tubing for Pulse Pal 2, to block neighboring LEDs. 
Make sure the bottom face of the light pipe remains exposed.

2. The 4 screws to secure the bottom panel are omitted.

The assembly guide for Pulse Pal 2 is here:

https://sites.google.com/site/pulsepalwi...y-for-gen2

and enclosure assembly for Pulse Pal 1.X is here:

https://sites.google.com/site/pulsepalwi...-enclosure

Hopefully we'll have the v2 enclosure illustrations ready soon.
Reply


Messages In This Thread
Assembly 2.0 - by bioesteel - 08-09-2016, 07:53 PM
RE: Assembly 2.0 - by Josh - 08-25-2016, 10:52 AM

Forum Jump: