My apologies if this information exists elsewhere in the forum or in the github repo but is this method for turning off the status LED still current in Bpod 2.0? I could not find this variable in the current version of the firmware. I tried modifying the setup command in BlinkModule.ino and the two EchoModule.ino by either setting digitalWrite(13, LOW) or commenting out the digitialWrite(13, HIGH) commands.
I would like the Bpod control box to be completely dark at all times.
Josh
[i]I should add that if you ever want to disable the status LED for other reasons (for example, a dark 2-photon setup), you can set
STATUS_LED_ENABLED
to 0 in the firmware.