Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Pulse Pal Hardware installation
#11
Hi Dymphie,

I'm pretty sure Serial.sys is a generic serial driver for a physical serial port (RS232).
It's typically associated with COM1 and COM2, and virtual serial ports (i.e. Arduino) begin at COM3. 
I don't have a good answer to why an Arduino board would ever be mistaken for an RS232 port, and assigned to COM1.

I'm glad you managed to get Pulse Pal working on a different machine!
Reply


Messages In This Thread
Pulse Pal Hardware installation - by dsuchan - 02-16-2018, 07:36 PM
RE: Pulse Pal Hardware installation - by Josh - 02-16-2018, 11:26 PM
RE: Pulse Pal Hardware installation - by dsuchan - 02-16-2018, 11:59 PM
RE: Pulse Pal Hardware installation - by Josh - 02-17-2018, 07:11 PM
RE: Pulse Pal Hardware installation - by dsuchan - 02-19-2018, 04:37 PM
RE: Pulse Pal Hardware installation - by Josh - 02-19-2018, 07:59 PM
RE: Pulse Pal Hardware installation - by dsuchan - 02-19-2018, 09:11 PM
RE: Pulse Pal Hardware installation - by Josh - 02-21-2018, 03:01 AM
RE: Pulse Pal Hardware installation - by dsuchan - 02-21-2018, 04:35 PM
RE: Pulse Pal Hardware installation - by dsuchan - 02-21-2018, 06:27 PM
RE: Pulse Pal Hardware installation - by Josh - 02-21-2018, 08:25 PM

Forum Jump: