Forums
Assembly instructions Bpod 2.0-2.3 - Printable Version

+- Forums (https://sanworks.io/forum)
+-- Forum: Bpod (https://sanworks.io/forum/forumdisplay.php?fid=1)
+--- Forum: Hardware (https://sanworks.io/forum/forumdisplay.php?fid=2)
+--- Thread: Assembly instructions Bpod 2.0-2.3 (/showthread.php?tid=765)



Assembly instructions Bpod 2.0-2.3 - Max - 03-11-2020

Hi,
I could not find the assembly instructions for the newer Bpod modules could someone point me in the right direction or share them with me  Smile

Best regards Max


RE: Assembly instructions Bpod 2.0-2.3 - ckopec - 03-25-2020

(03-11-2020, 02:50 PM)Max Wrote: Hi,
I could not find the assembly instructions for the newer Bpod modules could someone point me in the right direction or share them with me  Smile

Best regards Max

Max,

What module in particular? Or the Bpod itself? Josh did a wonderful job of labeling all the pads on the green boards so if you follow the bill of materials list on the wiki and determine which part from digikey is labeled what on the board, it's pretty easy to solder the components to the correct spot.

Chuck


RE: Assembly instructions Bpod 2.0-2.3 - Max - 04-21-2020

Thanks yes after the PCBs arrived from china it could see that they were nicely marked thanks for the heads up Smile