Forums
Custom pulse not saved in PulsePal - Printable Version

+- Forums (https://sanworks.io/forum)
+-- Forum: Pulse Pal (https://sanworks.io/forum/forumdisplay.php?fid=3)
+--- Forum: Software (https://sanworks.io/forum/forumdisplay.php?fid=8)
+--- Thread: Custom pulse not saved in PulsePal (/showthread.php?tid=3282)



Custom pulse not saved in PulsePal - Cristian - 03-01-2022

Hello,

I am working with a custom pulse made via Matlab PulsePal GUI. It works perfectly while the PulsePal is connected to the laptop (configuration already uploaded and savedĀ in PulsePal), even commanding the custom pulse via PulsePal. The problem is that after disconnecting it from the computer it does not work. All the features of the configuration are listed properly (no clue about the custom pulse since no preview there) but the custom pulse does not work. Maybe I am missing somethingConfused.

Thank you very much in advance!
Cristian


RE: Custom pulse not saved in PulsePal - Josh - 03-01-2022

Hello Cristian,

Unfortunately Pulse Pal does not store custom pulse trains across power cycles as it does with parameter settings.

-Josh


RE: Custom pulse not saved in PulsePal - Cristian - 03-15-2022

(03-01-2022, 03:42 PM)Josh Wrote: Hello Cristian,

Unfortunately Pulse Pal does not store custom pulse trains across power cycles as it does with parameter settings.

-Josh

Hi Josh,

I understand...thank you very much for your reply.

Best

Cristian